This is an E-Ink display HAT for Raspberry Pi, 7., 8inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh. we recommend you to reinforce the FPC with scotch tape when developing. This is an E-Ink display HAT for Raspberry Pi, 7.8inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh Waveshare Écran E-Ink HAT de 7,8 pouces, 1872×1404, pour No backlight, keeps displaying last content for a long time even when power down. Gray scale: 2-16 (1-4 bit). Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc., Outline dimension: 173., 8mm × 127., 6mm × 0., 78mm., Display size: 158., 184mm × 118., 638mm., Dot pitch: 0., 0845mm × 0., 0845mm. écran E-ink Raspberry Waveshare 7.8inch E-Ink Display Hat For Raspberry Pi 1872 Module IT8951 Rafraîchissement Partiel Please connect all the cables before powering the device, the device cannot support hot-plug. Overview This is an E-Ink display HAT for Raspberry Pi, 7., 8inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh. ) Viewing angle: 170° Wiki : www., waveshare., com/wiki/7., 8inch_e-Paper_HAT?amazon PACKAGE CONTENT 7., 8inch e-Paper x1 e-Paper IT8951 Driver HAT (B) x1 7., 8inch e-Paper Adapter x1 33PIN FFC (same side contact) x1 RPi screws pack (2pcs) x1 PH2., 0 20cm 8Pin x1USB type A plug to micro B plug cable x1, Note:7., 8inch e-Paper is big size screen, the glass panel and FPC is fragile, please be careful when use it for developing.